The stationary carpet-shearing machine is a high-precision machine for the efficient shearing of a large-scale carpet production. The machine is available with manual or automatic shearing unit feed.

For light carpets we offer the machine with integrated vacuum table. Shearing width 300mm, working width 1,4m to 5,6m. Stationary carpet-shearing machine TS 300 S allows a perfect finish and is easy to operate at the same time.

The cut off fiber will be sucked directly at the shearing aggregate. The suction hose and the power supply are always positioned in the right place by the help of the energy management chain.

Our task is to design a carpet shearing machine that

  • guarantees a perfect finish
  • is easy to operate
  • provides easy carpet handling

SchermesserIn the case of our newly developed stationary carpet-shearing machine TS 300 S this task is performed and guaranteed by the machine itself.

Our stationary carpet-shearing machine is a high-precision machine with tempered, hard-chrome plated guide shafts and service-free spherical bushings, as well as an accurately designed shearing unit functioning with exactitude:

The shearing roller made of high-quality tempered high-capacity high-speed steel can be re-sharpened frequently up to 30 times. The shearing blade made of tool steel can be re-sharpened several times.


Modular machine structure:

Basic machine TS 300 S

Teppichschermaschin TS 300-S von Hofmann Handtuft-Technik Masterfinish

Complete basic machine made of aluminium profile with energy management chain

+ Module R unwinding station

aluminium profile with 3 pieces rollers TS 300 S - Modul R bei Hofmann Handtuft-Technik

+ Module H carpet holder

made of aluminium profile, continuously adjustable

+ Module W carpet collecting tray

under the machine TS 300 S Modul H und Modul W bei Hofmann Handtuft-Technik


Frequency changer module FU

Shearing carpet piles made of pure wool does not cause “master finish” carpet shearing machines any problems. With very fine yarn, synthetic, cotton, silk, linen etc. the shearing results depends much on the cutting edges of the shearing roller and shearing knife.

These must be very sharp and also the shearing gap must be adjusted correctly and more closely.

Frequenzumrichter TS 300With the frequency changer the number of revolutions of the shearing roller can be reduced and also the direction of rotation can be changed for achieving a run in of the cutting edges at lower revolution. Thereby you reach a better cut, a perfect finish and a longer service life of the cutting edges.

Vacuum table

When shearing light carpets the danger exists that the carpet will be sucked in by the shearing aggregate and pulled into the shearing aggregate.

With a punched table plate and a side channel compressor, installed at the substructure a vacuum can be produced which holds down the carpet on the carpet support.

Vakuumtisch von Hofmann Handtuft-Technik By switching (reversing) you receive an air cushion table for easier handling with heavy carpets.

Also other carpet supports (carpet adhesive) are available upon request.

Technical Data:

Shearing width: 300 mm
Shearing depth: infinitely adjustable
Shearing roller drive: three phase motor with frequency converter
Working width: optional (Standard:
1,4 m; 2,0 m; 2,6 m; 3,2 m; 3,8 m; 4,1 m; 4,4 m; 5,0 m; 5,6 m)
Shearing unit feed: manual:
The very easily running shearing unit can be moved manually across the carpet.
Carpet transport: A carpet width of 300 mm is shorn, then the carpet will be displaced for approx. 290 mm by hand.

Necessary accessories

Exhaustion

In order to remove the fluff and to ″raise“ the pile, a suitable suction apparatus is required. For this machine we recommend our suction system type AS 200, a highly suited system for continuous operation.

Download TS 300 S Data Sheet